USB interface connected to 2.5 and 3.5 inch IDE and SATA hard disk
interface
USB2.0 to IDE / SATA high speed connection.
USB2.0 high speed transmission, stable performance,
Support CR cd-rom, DVD, cd-rom, cd-rw, DVD RW.
Support System: Windows 2000, Me, XP, Vista and Mac OS
Under Windows 2000 / ME / XP / Vista do not need a disk
Solidification structure, stable performance
USB IDE / SATA conversion line
Conversion head integration (2.5 inches, 5.25 inches and 3.5 inches, hard
disk type (below 320 g), cd-rom (recorder)
Support hot plug, plug and play.
Can be used in hard disk, cd-rom, Campbell, MO, ZIP transfer.
Good compatibility, can exchange data through the hardware platform.
Data transfer speed is fast, transfer speed is up to 480 MB / s.
Specifications:
Specification
USB cable length: cm 62 cm
4 Pin Power Cable Length: 17.5 cm / 6.89in.
SATA cable length: 36 cm / 14.17 inches.
Use of information:
Use of information
Before use, place the hard disk (add hard disk) jumper wires in disk mode
(MASTER).
(No power cord and other accessories)
First connect the power cord to the 220 V power supply.
Connect the power adapter to the end of the power cord (in order not to
distort the phenomenon caused by electric current, too large, some may be burned
to the power adapter).
Connect the USB cable to the computer and turn on the hard disk, you can
exchange data after the computer detects the USB device in a few
minutes.
Removing the hard drive box
Removing
Remove the hard drive as a way to remove the USB device, and then remove the
hard drive.
Please note: the power adapter is a high heating equipment, please pay
attention to maintain good heat dissipation. Please remove the AC adapter if you
are not using it. Do not connect it to the circuit board, in order not to
accelerate the aging of electronic components and reduce the service life of the
product. Summer arrives, the weather is hot, do not use the hard disk or drive
line time for a long time, it is easy to burn in such hot weather.