•Host Bus: PCI Express base 2.0 specifications
•Two USB 3.0 Host Ports
•Compliant with Universal Serial Bus 3.0 specification
•Low Profile PCI Form Factor
U3-PCIE1XG201 is a USB 3.0 to PCI Express Gen2 Host Bus Adapter.
The U3-PCIE1XG201 complies with Universal Serial Bus 3.0 Specification, and Intel’s eXtensible Host Controller Interface (xHCI).
The U3-PCIE1XG201 uses a PCI Express bus interface, and it is applicable for PCI Express solutions with host PC systems.
The U3-PCIE1XG201 supports data transfer up to 5 Gbps when connecting to USB 3.0 compliant peripherals, while maintaining compatibility with existing USB peripheral devices.
PCIe Host Bus
•Compliant with PCI Express Base Specification 2.0
•Supports PCI Express Card Electromechanical Specification Revision 2.0
•Compliant with Intel’s eXtensible Host Controller Interface (xHCI) Specification revision 0.95
•Supports PCI Bus Power Management Interface Specification revision 1.2
•Operational registers are direct-mapped to PCI memory space
•Supports Serial Peripheral Interface (SPI) type ROM
•Supports two downstream ports at all speeds
•Supports all USB compliant data transfer types as follows; Control / Bulk / Interrupt / Isochronous transfer
•Supports USB legacy functions
•USB3.0 PHY for super-speed Tx/Rx
USB Data Transfer Rate:
•Low-speed (1.5 Mbps)
•Full-speed (12.0 Mbps)
•High-speed (480.0 Mbps)
•Super-speed (5.0 Gbps)
Number of Ports:
•Two USB Host ports
Computer with PCI Express slot (x1, x4, x8, x16)
For the best performance (5.0 Gbps), U3-PCIE1XG201 should be installed in a PCIe Gen 2 compliant slot in the host computer. Most computers have PCIe Gen 2 (5.0 Gbps) throughput on x8 or x16 slots.
A PCIe Gen 1 compliant slot reaches up to 2.5 Gbps throughput
Operating System Requirements:
For Windows XP,
Windows XP, Windows
All payment methods are covered by Trait Tech securely.