Universal ActiSafety Multi ASH-4C Car Hud Head Up Display Device OBD II Speedometer Fuel Consumption Speed OBD

Item No.: T-CDVR-126
0 reviews Write a review
Unit Price:$34.87
Quantity:

Buy more, save more

Quantity1--99100--299300--499500--799800--1000
Price/Unit$34.87--$34.83$34.83--$34.54$34.54--$33.95$33.95--$32.51$32.51--$31.18

Product Details

 

 

Universal ActiSafety Multi ASH-4C Car Hud Head Up Display Device OBD II Speedometer Fuel Consumption Speed OBD

Main functions:

 

  • Parameter value: show the value with the units of kilometers, miles and engine speed. 
  • OBDII port: connect the car and HUD. 
  • Fuel icon: flash when the fuel is not enough to drive 100km. 
  • Engine failure: flash when vehicle’s engine has problems. 
  • Engine speed: show the state of engine speed. 
  • Engine speed icon: indicate the parameter value of engine with units of 1000r. It will flash when engine speed is alarming. 
  • Speed alarm: flash when speed exceeds the preset values. 
  • Rest tips: flash when drive continuously for more than 4 hours with HUD starting. 
  • Sound switch: light when voice alarm is opened. 
  • Fuel consumption icon: show fuel consumption is calculating. 
  • Fuel parameter value: show the consumption of fuel in recent driving. 
  • Dial button: multifunction switch, you can dial to left or right, you can enter into setting mode by long press. 
  • And also has the ability to decrease or increase fuel. 
  • Fuel consumption per hour: show oil mass consumption per hour in driving. 
  • Light sensor: sense the external light intensity and adjust the HUD’s brightness to adapt to environment automatically. 
  • Fuel consumption per 100km: show the fuel consumption per 100km in driving. 
  • Voltage, throttle valve, water temperature, ignition advance angle and acceleration per 100km: voltage shows the vehicle’s voltage; 
  • Throttle valve shows the size of itself; water temperature shows the temperature of vehicle cooling fluid; ignition advance angle shows the angle of twist in firing, 
  • It’s also a mark of engine’s efficiency. Acceleration per 100km shows performance of the vehicle’s acceleration per 100km. 
  • Seconds: show the unit of acceleration per 100km. 
  • Parameter value: show parameter value of Voltage, throttle valve, water temperature, ignition advance angle and acceleration per 100km. 
  • Mileage: light when the fuel only sustains 100km. 
  • Reel per minute: show the unit of engine speed if you multiply the parameter value with 10. 
  • Kilometer per hour: show the unit of speed. 
  • Mile per hour: show the unit of speed.  

Main Futures:

  • Plug and play. HUD can auto adapt to vehicle type which in line with OBDII or EUOBD(On-Board Diagnostic System). 
  • Comprehensive display. HUD can display many parameters at the same time as follows, vehicle speed, engine speed, 
  • Water tempe- rature (voltage, throttle valve position, ignition advance angle, time of 100 km acceleration), fuel consumption, mileage, low fuel tips, engine failure.
  • Diversiform display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode.
  • Free switch. Km and mile can be switched freely to meet the need of inch auto meter.
  • Suitable size. The display area is 5.5 inches which is very clear for driver to read data. 
  • Automatic power on and off. Starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle’s battery. Moreover, We pre- serve the hand switch function to controlthe HUD. 
  • Flexible alarm mode. HUD can offer single-stage and four-stage overspeed alarm modes to choose to make driving safer. 
  • Engine speed alarm. It contributes to shift gear in time to save fuel also has significance to new driver. 
  • Flexible brightness adjustment. The brightness can be adjusted automatically or manually to reach the best state which is in harmony with the environment.  

Main Technical Indicators:

  • Service conditions:Environment temperature: -400C—+800C Barometric
  • Press: 86—106 KPa Relative humidity: 10%—95%Environment voice: <=60 dB(A) 
  • Alarm of sound level:> =30dB(A)
  • Work voltage: 9V~16Vdc(12Vdc/400mA) 
  • All of the electronic components are conform to ROSH standards. 
  • Conforming to the China Compulsory Certification. 

Package included:

  • 1 x HUD Host
  • 1 x OBD II interface
  • 1 x Reflective Film
  • 1 x Mat
  • 1 x manual

 

 

Custom Reviews (0)

Average Rating:
Based on 0 Reviews
All the reviews are from the buyers who bought the products on trait-tech.com
Write a review
1
2
3
4
5
Name
Email address
Click the stars will be able to score


Show off your photos (Size: Max. 2MB. Supported formats: jpg、png、gif. )  
Payment Methods

All payment methods are covered by Trait Tech securely.

Payment Methods
Shipping Time
Shipping Time
Authoritative Security

Contact Information

Customer Services

Join Our Community

trait tech weichat