This device accepts DC 5 V to 24 V power supply. The red cable must be connected positive and black cable negative.
Select the correct power supply according to the LED application.
The red cable must be connected to LED positive and black cable negative. The peak output current is 12A, please reduce load if main unit is overheating.
ATTENTION: don't short circuit the LED output, this can lead to permanent damage!
Please pull the isolate part before use. The RF wireless remote control signal can pass through barrier, so it is not necessary to aim at the main unit when operate. For correct remote control signal received, do not install the main unit in closed metal parts. The remote control battery is 3 V CR2025 type, please only replace with the same type of battery.