Almost all 60 Hz AC buzzing is caused by grounding loops and acts as a radio antenna (ring antenna).
The buzzing noise canceller completely eliminates this by disconnecting the grounding circuit, making the signal line not absorbing the AC buzzing and noise first.
Compared to balanced circuits, unbalanced circuits are more prone to noise and RF interference - the longer the unbalanced cables are, the more likely problems are.
Use this device to convert two devices is one of the most economical and effective methods between unbalanced signal and real balanced signal.
Automatically convert signal voltage to match ground potential difference.
Characteristics:
60 hz noise cancellation, making AC buzzing noise,
Safety grounding breaks the grounding cycle, keeps the highest sound quality,
Passive equipment: no power supply, high performance ultra compact design
Four channel stereo 6.35mm and XLR and 3.5mm and RCA signal inputs and outputs:
A set of input and output 6.35mm TRS signals
A set of input and output XLR signals
A set of input and output 3.5mm signals
A set of input and output RCA signals
Fever grade high quality components and very sturdy structure.
Automatically converts an unbalanced signal into a balanced signal with no signal loss,
Use the 11: 1 isolation transformer to disconnect the ring antenna and the balanced audio line
Net weight: 0.45 kg
Product weight after packaging: 0.57 kg
Product size: length 115mm X width 100mm X height 37mm
Packaging: length 200 mm X width 180 mm X Height 55 mm
Note: there is no multi-channel stereo input and output at the same time.