Description

• Pre-amplifier adds phonograph functionality to any amplifier or receiver
• Pre-phonograph signal amplifier with aux input and volume control, and AUX is with
• The Phono preamp adds a phonograph function to any amplifier or receiver with standby AUX / CD / DVD audio line level input.
• It can also be used to direct the disc into a mixer or a computer sound card.
• With its accurate RIAA balance and 80 dB S / N ratio, the product can also be used to input the turntable directly into the sound system of the mixer or a computer. To switch
• Aux input replace stereo or computer use, eliminating the need for connect and
• Disconnect the source signal as well as the connection parts of the product.
• Easily improve the sound quality of the preamp or exceed the sound quality of the phonograph preamp built in a high-quality stereo component.
• Product configuration switch function selects AUX input instead of stereo or AUX input port occupied on the computer.
• There is no need to connect or disconnect a shared input signal source from the product.
• The output level control is very useful to the sound card and ensures the elimination
• From the largest signal difference between the switched signal sources.
• High quality RIAA phonograph preamp, for use with dynamic magnetic type jukebox.
• Accurate and stable integrated circuit design.
• Gold-plated main input and output connection RCA port, reliable performance.
• Stylish, sturdy metal case increases electrical noise resistance.
• The output level control allows the volume to be adjusted to receive signals from other sources.

Specification

• Distortion ratio: 0.06% (max).
• The frequency response is: +/- 0.5dB, 20Hz-20 kHz.
• Phonograph input impedance: Phono: 47 K ohm-200pFnominal.
• Line input impedance: AUXL: 10 K ohm.
• Output impedance: 200 ohm.
• Channel separation: 50 dB.
• Voice: 40dB (Phono) random signal source.
• Phono sensitivity: 3.3 MV.
• Output: 300 MV.
• SNR: 85 dB.
• Power supply: DC 12 V 1A.
• Net weight: 329g.
• Weight after packaging: 580g.
• Product size: 135mm length x 75mm width x 45mm height.
• Packaging: 200 mm length x 180 mm width x 55 mm height.

Package

• 1 X  prephonograph signal amplifier with aux input and volume control.
• 1 X 110V-240V DC12V power supply (line length is100CMN),
• 1 X stereo RCA to RCA wire gold-plated interface (wire length is 50CMN),
• 1 X 3.5mm stereo RCA wire plated interface (wire length is 20 cm).