Description

• The binary passive switch comparator uses an audio crossover circuit architecture that is a combination center of a pair of speakers and two channel audio signal switch controllers.
• It offers you the convenience and flexibility to listen to different speakers and
• Amplifiers in power amplifier and speaker systems. Designed to fit your speakers
• With a lossless audio combination of audio amplifiers or home theater systems,
• The unit product features high-quality, precision-engineered speaker connectors.
• The product can connect up to 12 specifications main wire combination control,
• To harvest maximum reliability and durability. Each channel can handle 200 W RMS.
• The product can support any conventional power amplifier or stereo receiver
• Can drive multiple sets of speakers. There is no need to increase the external impedance

Matching device.

• Switching the output signal does not affect the sound quality and volume loss of other sound, and can be easily combined with any device.
• Listen to A or B amplifiers through a pair of speakers.
• A speaker 1 or 2 has been heard from one of the two amplifiers.
• Compatible with all types of amplifiers and speakers.
• The input / output receives the heavy speaker cable or speaker pin
• Wire through the terminal port.
• Press the speaker selection switch to position the corresponding speaker 1 or speaker 2.
• Press the amplifier selection switch to position the corresponding amplifier ONE or amplifier 2.
• Turn on your stereo device, the product does not require external power.
• Fine steel housing, compact size suitable for any system.

Specification

• Channel power: up to 200 W per channel.
• The frequency response: 10Hz to 50 kHz.
• Net weight: 712g.
• Weight after packaging: 876g.
• Product size: 210mm length x 110mm width x 450mm height.
• Packaging: 260mm length x 185mm width x 65mm height.

Package

• 1 x Switcher